Stabilitatea taluzurilor - Slope

2027.33.9.1979 (13/10/2026) - A fost implementată analiza numerică a suprafețelor logaritmice. A fost integrat suportul pentru modelarea și procesarea suprafețelor la scară logaritmică în cadrul motorului de calcul. SLOPE, noul software GeoStru pentru analiza stabilității versanților. Cu funcții avansate și precizie îmbunătățită, SLOPE 2026 este conceput pentru a simplifica munca profesioniștilor în domeniul geotehnic. Disponibil acum! New: graphics, calculation templates, reports Saving data in open format Cloud integration Full compatibility with new operating systems Adăugat funcționalitatea de vectorizare a imaginilor folosind tehnici avansate de inteligență artificială. Aceasta permite o procesare mai precisă și eficientă a imaginilor, îmbunătățind experiența generală de analiză. Integrarea AI crește precizia în conversia imaginilor raster în formate vectoriale.

Capacitatea portantă și tasări – LoadCap

2027.32.4.1298 (13/10/2026) - Prezentăm noua versiune 2027 a LoadCap, acum disponibilă cu funcționalități și performanțe îmbunătățite. Actualizează astăzi pentru a experimenta cele mai recente îmbunătățiri!

Încercări de penetrometrie statica -Static Probing

2027.25.2.1240 (05/10/2026) - Versiunea 2027 a Static Probing este acum disponibilă, oferind performanțe îmbunătățite și capacități de analiză extinse. A fost implementat importul fișierelor de date .xml pentru noile dataloggere destinate încercărilor penetrometrice statice CPTe/CPTU (ex. CPTU-ACQ for TGAS – Pagani G.E. acquisition system). A fost adăugată o nouă listă de instrumente; reamintim că în Static Probing utilizatorii pot adăuga și personaliza orice instrument de testare.

Ziduri de sprijin - MDC

2027.32.9.1189 (04/10/2026) - 2027

Pereți susţinere excavaţii - SPW

2027.33.9.1669 (04/10/2026) - Suntem încântați să anunțăm lansarea Geostru SPw 2027, cea mai nouă versiune a software-ului nostru pentru proiectarea pereților de sprijin din palplanșe. SPw 2027 este acum disponibil, cu funcționalități noi și îmbunătățiri de performanță! New version 2027: Conform NP 124:2010, SR EN 1997-1:2006, SR EN 1997-1/NB. In cazul solicitarilor seismice: NP 124 (Anexa A)

Încercări de penetrometrie dinamica - Dynamic Probing

2027.27.6.1279 (04/10/2026) - GeoStru anunță lansarea versiunii 2027 a software-ului Dynamic Probing, care include îmbunătățiri ale performanței de calcul și funcționalități de analiză actualizate. Noua ediție asigură o fiabilitate sporită și susține un flux de lucru mai eficient. Major upgrade Dynamic Probing: General improvements; New correlations for: Unit weight & Saturated Unit weight; Rules: ISSMFE Technical Committee on Penetration Testing (1988) Dynamic Probing (DP) International Reference Test Procedure; Rules: Annex D.1. Standard Penetration Test (SPT) | Eurocode 7 part 3.

Simularea căderilor de roci 3D - GeoRock 3D

2027.18.5.940 (02/10/2026) - GeoStru GeoRock 3D – Versiunea 2027 este acum disponibil, software-ul avansat pentru geomecanică și analiza tridimensională a căderilor de roci. Funcționalități noi pentru proiectarea și gestionarea lucrărilor de intervenție, inclusiv bariere de protecție împotriva căderilor de roci, cu simulări 3D mai precise.

• Optimizare import fisiere *.asc. Utilizatorul poate alege un numar limitat de puncte pentru care sa realizeze triangulatia.
• Integrat modelator 3D.

Modelare geologică si geotehnică 3D - GM3D

2027.3.32.655 (02/10/2026) -

New Features and Improvements

• Support for importing new 3D file formats
  • Added support for importing IFC files, primarily used for Building Information Modeling (BIM) and managing architectural and engineering projects.
  • GM3D now supports importing commonly used 3D modeling software file formats, including:
    • .3ds (Autodesk 3ds Max): A legacy format for 3D models with meshes, materials, and textures.
    • .c4d (Cinema 4D): A proprietary format of Cinema 4D, useful for animation and advanced rendering projects.
    • .fbx (Filmbox): A universal format for transferring data between different 3D software, supporting animations, materials, and textures.
    • .ma (Maya ASCII): A text-based format representing Autodesk Maya scenes in a readable and editable way.
    • .max (Autodesk 3ds Max): A proprietary format that retains advanced details on materials, scenes, and animations.
    • .obj (Wavefront OBJ): A widely used format for software compatibility, supporting 3D meshes with UV coordinates and materials.

Fixes and Optimizations

• Improved stability and performance when importing large 3D models.
• Optimized texture and material handling to ensure better visual rendering of imported models.

This new feature enhances interoperability between GM3D and major 3D modeling and design software.

For more details on supported formats, visit: https://free3d.com/3d-models/3ds-max

Diguri din pământ - ESD

2027.2.2.628 (30/09/2026) - Version 2027

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2026.22.6.968 (30/09/2026) - Fixed bug in the method of Palmer
VERSION 2024

• Added the possibility to reverse the order of traces for every single shot of the project.
• Added the ability to truncate the acquisition of the traces during the import phase. This option is convenient for long acquisitions that otherwise would make the management of the shots costly from the point of view of the memory used.
• Graphic improvements for tests with one or two shots.
• Implmented Bing Maps for locations.
• Implemented the reading of BISON-2 files with .dat extension.
• Implemented the possibility to reorder traces after they have been imported into the software. N.B. Before using the reorder tool you must import all the shots.
• Customization of the color that highlights the semiwave of the traces.
• Polarity inversion for more traces in the same time.
• Improvement of the graphic area of travel time curves definition.
• Implemented the possibility of reversing the polarity of single waves.
• Graphical improvements.
• Improved the print preview of graphics.
• Implementation of the Critical Distance computation technique.
• Implementation of Undo/Redo functions.
• Improvements in the import of SEG2.
• Impelmented the export in *.csv and *.asc formats.
• Improvement regarding the search management of the work area.
• Added the ability to perform elaborations for Vs waves. The seismogram allows the import of the two shots (S1 and S2) in order to correctly identify the S-wave arrival.

Gabioane și praguri de fund - GDW

2027.22.5.1121 (29/09/2026) - VERSION 2027

Capacitatea portantă și tasări – LoadCap

2026.32.2.1282 (26/09/2026) - -Calculate post seismic settlements with: Idriss and Boulanger, Pradel, Yasuhara and Andersen Major version Loadcap 2024 • General improvements; • Implemented analytical solutions for estimating the ultimate bearing capacity of geogrid reinforced soil foundations (RSF) for both sand and silty clay soils. • Method Vesic 1975 Change depth and form factor; • Opening file with drag-drop; • Standards upgrade: NTC 2017, SR EN 1997-1/NB/2007; • Calculating seismic parameters for zones east Europe; • Plugin management: Embankment, Overturning, Converting Unit User; • Update System component.

Ziduri de sprijin - MDC

2026.32.9.1187 (25/09/2026) - VERSIUNI 2026

• Optimizare algoritm de calcul armaturi pentru pereti cu sectiuni in trepte. Pentru ziduri pe piloti s-a introdus simbol pentru conditia de verificare la sarcina limita verticala.
• Imbunatatiri diagrama forte.
• Modificare diagrame solicitari. Integrade capacitate portanta, Integrare raport MDC. Integrare rapor modul stabilitate globala.
• Separare grafice presiuni induse de seism si presiuni teren. Implementat grafic suprasarcina.
• Implementata metoda Hansen pentru calculul sarcinii limita.
• Implementatã o noua comanda pentru gestiunea avansate a coordonatelor vârfurilor sectiunii zidului. Folosind aceasta comanda va fi posibilã modelarea mai multor tipuri de ziduri. Din noua comanda "Forte" se pot vizualiza actiunile stabilizante si de rãsturnatre ce actioneaza asupra zidului.
• Revizuirea diagramelor incrementului de împingere datorat cutremurului.
• Segment de zid care iese din teren, precum cele pentru garduri. Inserati înãltimea rambleului negativã.
• Aplicarea sarcinilor/încãrcãrilor la înãltimi diferite de planul terenului.
• Import de fisiere de încercãri de penetrometrie statice si dinamice. Fisierele pot fi importate cu comanda directã sau cu simple operatiuni de drag and drop pe zona de lucru (se "trag" pur si simplu cu mouse-ul pe zona de lucru).
• Fisierele generate de programele noastre pentru prelucrarea încercãrilor sunt în format deschis deci editabile cu un editor de text.
• Importul este foarte util întrucât sunt importati zeci de parametrii geotehnici ale cãror unitãti de mãsurã sunt convertite automat.
• Asignând o înãltime negativã rambleului se poate coborî nivelul terenului din spatele zidului.
• Revizuire completa a programului in versiunea nationala si cele internationale.
• Modificãri privind listarea materialelor.
.
• Noua versiune disponibila.
• Raport de calcul integrat.
• Modificari editor raport de calcul.

Încercări de penetrometrie statica -Static Probing

2026.25.2.1235 (23/09/2026) - VERSION 2020

• Adaugata comanda de asignare a comportamentului geotehnic pentru grupuri de strate. Comanda se activeaza cu click dreapta pe coloana comportamentului geotehnic in fereastra Introducere date.
• Mentenantã pentru versiunea internationalã.
• Corectie formatare vitezã unde de forfecare.
• Fereastra Date generale, introducere: cod comandã, numãr certificate de atasat, zonã, latitudine si longitudine.
• Identificarea zonei în Google Maps. Imaginea poate fi salvatã pentru a fi utilizatã ca fundal "imagine raster" pentru identificarea încercãrii.
• În fereastra Încercare curentã s-au adãugat date certificare: numãr certificat, proces verbal de acceptare, numãr comandã si date asociate. Aceleasi informatii au fost adãugate în modelul grafic si în tabelele din raport.
• În fereastra Optiuni grafic s-au adãugat autorizatii si semnãturi. Aceleasi elemente s-au adãugat si în modelul grafic si în tabelele din raport.
• În fereastra de Optiuni grafice , în panoul Vizualizare, s-a adãugat un nou instrument ce permite colorarea graficelor în mod uniform si transparent.
• Noi obiecte grafice si culori.
• În rapoartele tabelare au fost adãugate informatii privind localizarea încercãrilor, index si sumar.
• În faza de prelucrare si de raport au fost create comenzi pentru a permite navigarea în interiorul documentelor.
• Corectie probleme de listare pe mai multe pagini pentru anumite configuratii stratigrafice.
• Subdivizare a stratigrafiei în mai multe pagini conform scãrii setate de utilizator.
• Adãugare autorizatii în rapoartele grafice si numerice.
• Adãugare semnãturi în subsolul paginii pentru rapoartele grafice.
• Export rapoarte în format XML.
• Piezocon seismic (SCPTU).

Răspuns seismic local - RSL III

2026.22.5.1099 (21/09/2026) - VERSION 2022

Pereți susţinere excavaţii - SPW

2026.33.9.1604 (19/09/2026) - VERSIUNI 2016

• Modificat algoritm de calcul pentru grinda continua.
• Implementata posibilitatea de gestionare a textelor diagramelor.
• Metoda FEM - ancoraje pe mai multe randuri: optimizata functia de desen a structurii.
• Imbunatatiri interfata si raport de calcul.
• Import sectiune topograficã din: fisier DXF, TriSpace, fisiere text.
• Modificare modalitate de inserare palplansã;
• Adãugare etrieri în spiralã la fise piloti;
• Pânã freaticã prin puncte:
• Gestriune graficã legende strate;
• Verificare la ridicare bazã excavatie pentru verificãrile HYD;
• Adãugarea verificãrilor hidraulice în raportul de calcul;
• Corectatã problema trecerii datelor din SPW în stabilitatea globalã conform abordãrii A2+M2+R2.
• Inseratã axa de referintã "Click pe riglã pentru a insera axa de referintã".
• Implementate comenzi rapide: click pe desen si inserati: D pentru date generale, A pentru arhive, G pentru geotehnica, Z pentru zoom, P pentru deplasare, D pentru a mãsura distanta.
• Incarcari limita verticale functie de factorul de corelatie verticale verificate.
• Incarcari limita verticale si pentru sectiuni dreptunghiulare.
• Informatii dinamice pentru lucrarea de sustinere. Este suficient sa va deplasati cu mouse-ul pe capatul lucrarii pentru a avea informatii despre: geometrie, compozitie sectiune, tipologie sectiune.
• Corectie modul grinda de legatura
• Modificare la modul de desenare a grinzii de legatura

_________

Gabioane și praguri de fund - GDW

2026.22.5.1100 (18/09/2026) - 2016

Piloți și micropiloți-MP

2026.16.3.1096 (17/09/2026) - Release of new version of MP 2026. This is a new software although we have kept the same logic and interface.

Secțiuni topografice în AutoCAD: Auto Cross Section

2026 (11/09/2026) - Sectiuni topografice in AutoCAD: Auto Cross Section

Analiza elementelor finite în geotehnică - GFAS

2026.14.2.1249 (11/09/2026) - Suntem încântați să anunțăm lansarea noului software GFAS versiunea 2025! Această actualizare aduce îmbunătățiri ale performanței, funcționalități inovatoare și o experiență de utilizare optimizată. Actualizați acum pentru a valorifica pe deplin potențialul GFAS 2025!

Multi-Channel Analysis of Surface Waves - Easy MASW

2026.28.6.1135 (11/09/2026) - New Version 2026. General improvements and bug fixes

Calcul structural - Edifici in CA

2026.16.1.1197 (11/09/2026) - Versiunea 2026.16.1: corectie la deschiderea proiectelor (folder GRresources) si biblioteci actualizate

Fundații - Fondazioni CA

2026.16.1.1197 (11/09/2026) - Versiunea 2026.16.1: corectie la deschiderea proiectelor (folder GRresources) si biblioteci actualizate

Analiza dinamică în geotehnică – QSIM

2026.26.4.1044 (04/09/2026) - Newmark Deformation Analysis

Încercări de penetrometrie dinamica - Dynamic Probing

2026.27.6.1268 (04/09/2026) - Export graphics in excel for allowable pressure and reduced allowable pressure
VERSION 2016

• Method Terzaghi-Peck (1948), computation of Cu: min and max values in computation report.
• Introduced new column in the data input table for the values of NSPT on equipment step.
• Given the option to alter the size of the characters used for the number of blows: Graphic report options -> Text management.
• Introduction of drilling system efficiency.
• Correlation coefficient variable with the depth.
• Computation of CN.
• Computation of N160.
• Verification of the correlations Nspt N160.
• Review of Spanish version of the program.
• General data window, introduction of: order code, number of certificates to attach, zone, latitude and longitude.
• Adaptation according to Circolare 08 September 2010, n. 7619/STC. Italian Ministry of the infrastructures and transportations. Criteria for the release of the authorization to the Laboratories for the execution and certification of geognostic inquiries, sampling and tests on site of which art. 59 of the DPR n. 380/2001.
Determination of the zone in Google Maps. The image can be saved and be used like background "raster image" for the determination of the tests. Current test window, added certification data: certificate number, acceptance report, order number and related data. The same data was added in graphic model and print report. Graphic options window, added: ministerial authorization, signatures. The same data was added in graphic model and print report. Attention in Graphic options window > View panel, we added a selection command that allows you to color the diagrams in a transparent and uniform manner. Graphic objects: New graphic objects and colors. Tables in print report - added in the initial header the terms expected for law, planimetry with indication of the location of the tests, index and summary. In phase of elaboration and of report generation were created some commands to improve the navigation inside of the documents.
• Improved management of 3D stratigraphy. We remember you that the automatic reconstruction of 3D stratigraphy takes place on the base of the names assigned to the layers. As an example, test 1 is composed from three layers named: A, B, C; test 2 must have the same number of layers with the same names: A, B, C. The same reasoning must be followed for successive tests. For an optimal view of the 3D it is moreover advised to assign to the same colors or textures to the layers pertaining to various tests but with the same name.
• Bore hole tests, cohesive-cohesionless soils processing.
• Soil category: computation of Vs, correlation of Otha and Goto from 78 for the differentiation of the deposit's age.
• Soil category: type s2 for soils susceptible ti liquefaction.
• Soil category: theoretical notes included in print report.
• Computation of subfoundation coefficient in shallow foundation module.
• Modified layar generation in data input.
• New options in graphic preferences. Water table view even in absence of stratigraphy.
• Printing more copies when using Windows 7.

Interpretarea datelor încercărilor de pompare - GeoTheis

2026.10.0.1000 (04/09/2026) - New 2026

Prelucrări hidrologice - Runoff Lab

2026.0.15.530 (02/09/2026) - Autentificare GeoStru NX si import statii pluviometrice din Hydrogeo NX

Downhole - Metoda seismică Downhole

2026.18.5.978 (31/08/2026) - VERSION 2026

Implementat calculul parametrilor medii cu metoda interval cand greutatea volumica a terenului nu este determinata automat de catre program.

Import fisiere *.seg2 generate urmand standardul de date numerice pe 16 bits.

Implementata posibilitatea de a copia stratigrafia seismica definita cu Metoda Directa in Metoda Interval.

Import fisiere *.drm.

Implementat graficul profilului vitezelor pentru undele P si S in metoda "directa" si "interval" fata de stratigrafia seismica impusa.

Introdusã posibilitatea de a elimina offsett-ul datelor seismice (componenta continuã).

Îmbunãtãtitã gestiunea graficii cu posibilitatea de a modifica dimensiunea textelor pentru titlul graficelor, valori numerice ?i descrieri ale axelor.

Îmbunãtãtitã gestiunea gridului graficelor.

INtrodusã posibilitatea de a afisa valorile de picking prelucrat pe seismograme.

Adaugatã posibilitatea de a prelucra numai undele S.

Implementatã capacitatea de a analiza fi?iere de achizi?ii cu dublu geofon.

Adaugat posibilitatea de a normaliza datele în faza de analiza.

Inseratã posibilitatea de filtrare a înregistrãrii date.

A fost realizatã o modificare de calcul a Vs30. Dacã încercarea nu ajunge la 30 metri este extins ultimul strat la 30 metri.

Revizuire completã a programului în versiunile nationale si internationale.

Import fisiere cu date de la aparatura Ambrogeo (fisier *.dta).

Released English and Spanish versions.

Modificare extractie date si desen înregistraãri din fisiere SEG2.

Raport spectral vertical orizontal - Easy HVSR

2026.26.8.1026 (31/08/2026) - New version 2026 Optimization search algorithm resonance frequency

Implmented Bing Maps for locations.

Added support to make the application independent from the international options and language defined within the Control Panel of Windows. The software will use, however, the point as a decimal point and comma for digit grouping.

Improvement of drawings export in the final report.

Introduced an improvement in the calculation of smoothing with the techniques Triangular constant, Triangular proportional and Moving average.

Improved the processing with customed duration windows.

Implemented the import of drm format files.

Implemented the export of the stratigraphy in .edp files.

Implemented the possibility to contact GeoStru Staff directly from the software.

Implemented the export of the H/V spectrum in csv format to be used for comparisons with various acquisitions.

Improvement in the management of the graphics of the H/V spectra.

Improvement in the management of the inversion models.

Improvement in the export of H/V graphics for the print reports.

Improved the import of SEG2 files.

Implementation of an autonomous system of notification and download of upgrades.

Added new functions for editing the computation report.

Ability to change the display scale for the graphics of given traces.

Optimization of SEG2 file import.

Optimization of trace import from saf files.

Display of the coordinates of the H/Vspectral ratio points in the corresponding graphic.

Stabilitatea taluzurilor - Slope

2026.33.9.1962 (28/08/2026) -

• Optimizare algoritm de calcul al momentului plastic pentru sectiunile din beton armat
• Calculul capacitatii portante orizontale dupa Broms si in prezenta apei subterane
• Introducerea functiei drag-and-drop pentru deschiderea fisierelor
• Generare automata a zidurilor din blocheti in modulul de pamant armat. Implementata posibilitatea de gestionare a textelor in modulul de pamant armat.
• S-a implementat calculul automat al coeficientilor seismici conform celor mai utilizate normative; Calculare automata a incrementului presiunilor neutrale in camp dinamic, solutie automata pentru integrarea accelerogramei de intensitate Arias, Trifunac.
• Implementare calcul nelinear prin metoda DEM. Este posibila efectuarea unei analize nelineare asignand legatura constitutiva a materialului pe segmente. Procedura de distributie a tensiunilor plastice se executa cu metoda tangentelor Newton-Raphson.
• Versiune noua, revizuita.
• Optimizari ale metodelor de calcul Morgenstern&Price si Spencer.
• Rezolvata problema de tiparire presiuni neutrale in cazul metodelor Morgenstern & Price si Spencer.
• Posibilitate integrare/omitere teorie in raportul de calcul. Raport detalii lucrari de interventie. Imbunatatiri import 3D si import DXF. Integrare algoritm DEM. Imbunatatiri aduse raportului de calcul al lucrarilor de sprijin din pamant armat.
• Listare presiune interstitiala dupa metoda Sarma.
• Modificari la raportul de calcul: optimizare stil text ?i tabele, tiparirea cele doua valori ale rigidita?ii solului (metoda DEM).
• Noua metodã de calcul, Zeng Liang. Printre cele mai bune metode din ultimii ani. Rezultate excelente pentru consolidarea cu Piloti.
• Metoda DEM (Discrete Element Method): Implementate noi metode pentru analiza nelinearã cu noi optiuni de analizã, adãugatã variabilitatea parametrilor geotehnici în functie de deplasãri, extrapolarea tuturor rezultatelor de calcul. Import de sectiuni, inclusiv lucrãri de sustinere, piloti, pãmânt armat din TriSpace.
• Inseratã axa de referintã "Click pe riglã pentru a insera axa de referintã".
• Implementate comenzi rapide: click pe desen si inserati: D pentru date generale, A pentru arhive, G pentru geotehnica, Z pentru zoom, P pentru deplasare, D pentru a mãsura distanta.
• Generarea de seisme artificiale non-stationare, metode: Sabetta F., Pugliese A.: Estimation of Response Spectra and Simulation of Nonstationary Earthquake Ground Motions, Bulletin of the Seismological Society of America, Vol. 86, No. 2, pp. 337-352, April 1996.
• Calculul acceleratiei critice. Se întelege prin acceleratie criticã acceleratia minimã necesarã pentru a învinge rezistenta la alunecare a taluzului. Comparând acceleratia maximã cu acceleratia criticã se vor evidentia zonele susceptibile la alunecãri induse seismic.
• Importul accelerogramelor artificiale cu BELFAGOR.

Texturi litologice

2026.8.28.1 (28/08/2026) - VERSIUNEA 2026 - Categorie nouă DIN 4023 / ISO 14688 (58 texturi, același catalog ca GeoStru NX). Începând cu versiunile 2026 texturile sunt incluse în kitul fiecărui program GeoStru; acest pachet este necesar doar versiunilor anterioare.

Coloane stratigrafice - Stratigrapher

2026.24.1.1040 (23/08/2026) - Stratigrapher 2026

Proiectarea instalațiilor geotermice - GHP DESIGN 3D

2026.8.3.147 (22/08/2026) - GHP DESIGN 3D version 2026

Proiecții stereografice de mecanică a rocilor - GMS

2026.8.2.920 (21/08/2026) - VERSION 2026

• Optimization of calculation algorithm of the reinforcement for walls with stepped sections. For walls founded on piles, introduced a symbol for the check condition to limit vertical load.

Diguri din pământ - ESD

2026.2.2.604 (19/08/2026) - Version 2022

Parametrii geotehnici caracteristici - CVSoil

2026.14.6.736 (14/08/2026) - Noua versiune 2024

Răspuns seismic local 2D- RSL III 2D

2026.14.2.1245 (12/08/2026) - Diverse adăugări Modificarea importului accelerogramei Îmbunătățiri generale Lansare RSL versiunea III 2D

Analiza lichefierii terenului - Liquiter

2026.25.6.1104 (31/07/2026) -

• Method based on the results of SPT tests (Boulanger & Idriss, 2014)
• Method based on the results of CPTe/CPTu tests Boulanger & Idriss, 2014)
• Method based on the velocity profile of shear waves Vs (Andrus & Stokoe, 2000)

• Implemented the method of Sonmez (2003) for the computation of Liquefaction Potential Index.

Calcularea secțiunii din beton armat conform EC - RC-SEC-EN

2026.3.0.901 (31/07/2026) - Version 2016

• Implemented National Annex of Bulgaria and Italy
• Corrected ratio Es/Em in eq. (7.9) EC2 from 15 to the actual value

Simularea căderilor de roci 2D - GeoRock 2D

2026.14.2.1048 (24/07/2026) - VERSION 2025

• Optimizare gestiune lansari > 1000.
• Implementate grafice cu func?ia de previzualizare imprimare, comanda pentru a afi?a toate traiectoriile ?i comanda pentru a ?terge elemente bazei de date de materiale. Create de noi op?iuni: viteza grafice pentru fiecare traiectorie, toate traiectoriile, total. Activat comenzi Undo ?i Redo pe mai multe niveluri.
• Modificare procedura import fisier EXCEL.
• Modificari diverse.

Fundații - Fondazioni CA

2026.16.0.1196 (23/07/2026) - 2021

Calcul structuri rutiere flexibile și semirigide - RPD

2026.2.1.200 (15/07/2026) - RPD 2025

Evaluarea riscului hidrologic - Hydrologic Risk

2026.21.2.961 (14/07/2026) - GeoStru Hydrologic Risk 2026 este acum disponibil – cu instrumente îmbunătățite și performanțe sporite pentru o analiză a riscului hidrologic la un nivel superior.

Modelare geologică si geotehnică 3D - GM3D

2026.3.32.551 (06/07/2026) - VERSION 2019

Soil Nailing Analysis SNL

2026.1.0.481 (29/06/2026) - SLN (Soil Nailing Analysis SNL)

Calcul structural - Edifici in CA

2026.16.0.1194 (16/06/2026) - Version 2021

Răspuns seismic local 2D- RSL III 2D

2026.12.0.1210 (03/03/2026) - VERSION 2022

Analiza lichefierii terenului - Liquiter

2026.24.5.1098 (20/02/2026) - Version 2021

Evaluarea riscului hidrologic - Hydrologic Risk

2026.20.1.949 (20/02/2026) - VERSION 2016

• Introduced two new features in the calculation: Order sections and Recalculate sections elevations. By convention the river sections had to be assigned in the opposite direction to the direction of the current, The option introduced Order sections" allows to order the sections even though they were assigned from upstream to downstream. Every time that river elevations change it must be used the command "Recalculate sections elevations" the program will update the elevations to the new changes.
• Section direction individuation. The direction must always be the same in order to correctly draw the flooding map.
• New command to modify sections: allows plan section displacements. Direction can be changed by right clicking the section. Attention: the sections must always have the same direction.
• Riverbed sections from DXF.
• New command in View menu – ONLY hydrologic network.

Downhole - Metoda seismică Downhole

2026.16.4.868 (21/01/2026) - Version 2020

Raport spectral vertical orizontal - Easy HVSR

2026.26.4.994 (21/01/2026) - VERSION 2021

• Implmented Bing Maps for locations.
• Added support to make the application independent from the international options and language defined within the Control Panel of Windows. The software will use, however, the point as a decimal point and comma for digit grouping.
• Improvement of drawings export in the final report.
• Introduced an improvement in the calculation of smoothing with the techniques Triangular constant, Triangular proportional and Moving average.
• Improved the processing with customed duration windows.
• Implemented the import of drm format files.
• Implemented the export of the stratigraphy in .edp files.
• Implemented the possibility to contact GeoStru Staff directly from the software.
• Implemented the export of the H/V spectrum in csv format to be used for comparisons with various acquisitions.
• Improvement in the management of the graphics of the H/V spectra.
• Improvement in the management of the inversion models.
• Improvement in the export of H/V graphics for the print reports.
• Improved the import of SEG2 files.
• Implementation of an autonomous system of notification and download of upgrades.
• Added new functions for editing the computation report.
• Ability to change the display scale for the graphics of given traces.
• Optimization of SEG2 file import.
• Optimization of trace import from saf files.
• Display of the coordinates of the H/Vspectral ratio points in the corresponding graphic.

Multi-Channel Analysis of Surface Waves - Easy MASW

2026.28.6.1048 (16/01/2026) - VERSIUNI 2021

• Imbubatatiri privind asignarea proprietatilor grafice personalizate.
• Implementata posibilitatea de a inversa polaritatea unei inregistrari.
• Imbunatatiri privind personalizarea setului de culori pentru spectre si salvarea setarilor in fisier.
• Implementata posibilitatea de a estima densitatea stratelor plecand de la valoarea lui Vp.
• Implementata trimiterea automata de erori catre GeoStru.
• Implementatã optiunea de import fisiere drm.
• Implementatã posibilitatea de a selecta partea utilã a înregistrãrilor si înscrierea acesteia sub o polilinie.
• Salvarea parcursului ultimei texturi folosite.
• Modificarea modului de gestiune a datelor generale.
• Export stratigrafie seismicã în fisier .edp.
• Inseratã posibilitatea de a contacta personalul GeoStru prin intermediul programului.
• Implementat importul fisierelor SEG2 care folosesc formatul numeric de 20 bit.
• Modificatã abordarea privind problemele de perturbatie a programului.
• Vizualizare si printare stratigrafie.
• Introducerea versiuni LITE cu urmatoarele limitari: - Numar maxim de moduri ce se pot folosi pentru prelucrare: 1; Model sintetic : Dezactivat; - Raport analiza: redus.
• Software disponibil în limba spaniolã.
• Software disponibil în limba englezã.
• Au fost încorporate functionalitãti noi pentru editorul raportului de calcul.
EASY REFRACT VERSIUNI 2016
• Imbunatatire a cautarii zonei de lucru.
• Adaugata posibilitatea de a prelucra unde Vs. Seismigrama permite importul a doua lovituri (S1 si S2) pentru a identifica in cel mai corect mod sosirea undelor S.

Analiză și calcul - radier general pe piloți - DeepFound

2026.2.1.454 (18/12/2025) - Vers. 2026

Coloane stratigrafice - Stratigrapher

2026.24.1.1028 (05/12/2025) - VERSION 2020BIM COMPATIBLE

Calculul secțiunilor din beton armat - RC-SEC - IT

2025.14.1.1084 (29/11/2025) - 2022

Răspuns seismic local - RSL III

2025.21.5.1024 (05/11/2025) - VERSION 2021

Calcularea secțiunii din beton armat conform EC - RC-SEC-EN

2025.2.0.868 (28/10/2025) - Version 2015

Răspuns seismic local 2D- RSL III 2D

2025.12.0.904 (17/09/2025) - Nuova versione 2025.

Stabilitatea și consolidarea blocurilor de rocă - RockPlane

2024.9.2.714 (04/07/2025) - Version 2024

Terasamente de așezare

2025.2.4.225 (03/07/2025) - ro

Soil Nailing Analysis SNL

2024.1.0.279 (26/06/2025) -

Pereți susţinere excavaţii - SPW

2024.31.7.1164 (25/06/2025) - A new version has been released.

Analiza elementelor finite în geotehnică - GFAS

2025.12.0.878 (19/06/2025) - Version 2016

Încercări de penetrometrie statica -Static Probing

2024.23.2.1044 (27/05/2025) - New release 2024

Ziduri de sprijin - MDC

2024.31.8.1120 (21/05/2025) - New release 2024

Analiza lichefierii terenului - Liquiter

2024.24.5.1079 (14/05/2025) - Release 2024

Răspuns seismic local - RSL III

2024.21.5.1004 (14/04/2025) - Versione 2024

Piloți și micropiloți-MP

2024.16.2.1065 (10/04/2025) - VERSION 2017

• Implementat calculul factorului de siguranta pentru actiuni orizontale. Imbunatatita optiunea de salvare pentru combinatiile de sarcina.
• Reprezentarea in forma tabelara a valorilor de iesire ale fortei normale si de forfecare, coeficientului de impingere laterala, a frecarii de-a lungul trunchiului si a factorului de aderenta.
• Optimizat model de calcul pentru coeficientul de pat Ks (Chiarurgi - Maia).
• Corectatã problema de import a datelor din Static Probing.
• În date generale se poate asigna modalitatea de încãrcare: compresiune si tractiune. A fost implementatã aceastã posibilitate pentru a permite calculul sarcinii limitã independent de sistemul de sarcinã/încãrcare. Este posibilã asignarea unui sistem de sarcinã compresiuni si tractiune pe baza cãruia programul calculeazã automat dacã este compresiune sau tractiune pentru a aplica un coeficient corect pe rezistenta lateralã.

Interpretarea datelor încercărilor de pompare - GeoTheis

2023.10.0.990 (13/03/2025) - 2018

Stabilitatea taluzurilor - Slope

2025.32.8.1730 (12/03/2025) - 2025.32.8

Evaluarea riscului hidrologic - Hydrologic Risk

2024.20.1.868 (04/03/2025) - New version 2024

Puțuri structurale - Well Foundation

2024.1.1.106 (28/02/2025) - Version 1.0.0

Calcul structuri rutiere flexibile și semirigide - RPD

2025.1.0.168 (20/02/2025) -

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2024.21.4.922 (18/02/2025) - Version 2016

Modelare geologică si geotehnică 3D - GM3D

2024.2.18.312 (18/02/2025) - VERSION 2019

GeoStru Artificial Intelligence - GILA

2025.0.5.99 (23/01/2025) - Versione 2025

Criterii de rupere al unei mase de rocă, conform lui Hoek Brown – Rocklab

2024.8.4.469 (15/10/2024) - VERSION 2024

Recomandari privind amplasarea punctelor de investigare geotehnica - GIT

2024.0.1.160 (01/10/2024) - Version 2024

Formularul de Geologie și Geotehnică - Geostru Formula

2024.7.3.934 (25/06/2024) - Versiune 2024

Parametrii geotehnici caracteristici - CVSoil

2024.12.6.724 (24/06/2024) - VERSION 2020 Adding correlation between surveys

• Implemented Bing Maps for locations.
• Introduced some improvements in the report management and in the rtf / doc / docx format saving.
• Opportunity to enter a summary investigation, containing the elaborations of the parameters present in more investigations of the same area.
• Implementation of an automatic control system and downloads of updates.
• Improvement in the management of the graphs.
• Added the possibility of removing layers from investigated verticals.
• Reduced export of the results.

Analiză și calcul - radier general pe piloți - DeepFound

2024.2.1.434 (12/06/2024) - Vers. 2024

Proiecții stereografice de mecanică a rocilor - GMS

2024.8.1.608 (13/05/2024) - 2022

Mecanica rocilor – Rock Mechanics

2024.20.4.840 (09/05/2024) - New version 2022

Simularea căderilor de roci 2D - GeoRock 2D

2024.12.1.1025 (09/05/2024) - Version 2020

Calculul secțiunilor din beton armat - RC-SEC - IT

2024.14.1.1074 (18/04/2024) - 2021

Slope 2D Section

2024.30.6.1568 (27/03/2024) - Version 2024

Slope 2D Section

2024.30.6.1564 (22/03/2024) - Version 2024

Terasamente de protecție împotriva căderilor de roci

2024.1.1.164 (15/03/2024) -

Răspuns seismic local 2D- RSL III 2D

2024.12.0.868 (13/03/2024) - 2024

Stabilitatea taluzurilor - Slope

2024.30.6.1564 (11/03/2024) - New release 2024

Analiza elementelor finite în geotehnică - GFAS

2024.12.0.867 (11/03/2024) - 2024

Calcul structural - Edifici in CA

2023.16.0.1110 (04/03/2024) - Version 2020

Structuri în subsol - Scatolari

2023.12.0.710 (28/02/2024) - new

Stratigrapher LT

1.1.1 (17/02/2024) - Version 2024

Factorul de amplificare topografică în prezența versanților și a crestei sau vârfurilor.

1.1.1 (16/02/2024) - Geostru amplificazione topografica 2024

Software topografie - TriSpace

2023.24.3.658 (18/01/2024) - New version 2021, general improvement and general bug fix, compatibility with win 10, upgrade manual and documentation

Fundații - Fondazioni CA

2023.16.0.1108 (01/12/2023) - 2020

Capacitatea portantă și tasări – LoadCap

2023.32.2.1142 (29/11/2023) - New release 2023

Încercări de penetrometrie dinamica - Dynamic Probing

2023.27.5.1158 (13/11/2023) - New release 2023

Multi-Channel Analysis of Surface Waves - Easy MASW

2023.28.6.1010 (30/08/2023) - New release 2023.

Modelare geologică si geotehnică 3D - GM3D

1 (04/07/2023) - 2023

Analiza lichefierii terenului - Liquiter

2023.24.5.1068 (26/06/2023) - New release 2023

Calculul secțiunilor din beton armat - RC-SEC - IT

2023.14.1.1065 (30/05/2023) - New release 2023

Pressiometric & penetrometric method - PQL

2023.1.1.1 (29/03/2023) -

Analiza elementelor finite în geotehnică - GFAS

2022.12.0.857 (21/03/2023) - 2022

Răspuns seismic local 2D- RSL III 2D

2022.12.0.856 (14/03/2023) - 2022

Raport spectral vertical orizontal - Easy HVSR

2022.26.4.963 (22/02/2023) - New release 2022, Bug fix in manual selection

Stabilitatea taluzurilor - Slope

2022.30.6.1499 (23/01/2023) - Slope 2023/W has been completely rewritten in a new programming language. It is a new software, and the previous slope files are incompatible with the latest version. We have created a tool for converting files from .sta to .stax and from .mre to .mrex. The conversion tool can start from the slope file menu or the program installation folder. Slope now has many new features, including graphics, calculation templates, reports Saving data in an open format, Cloud integration Full compatibility with new operating systems etc.

Pământ armat – MRE

2022.30.6.1495 (14/12/2022) - ro

Capacitatea portantă și tasări – LoadCap

2022.32.2.1101 (13/12/2022) - Integration with geodropbox. Extensions to all European regulations

Diguri din pământ - ESD

2022.2.1.488 (10/12/2022) - New release 2022

Încercări de penetrometrie dinamica - Dynamic Probing

2022.27.5.1135 (08/11/2022) - Version 2022 release various bugs have been fixed

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2022.21.4.898 (14/10/2022) - New Release 2022

Coloane stratigrafice - Stratigrapher

2022.24.1.984 (20/09/2022) - New version 2022 released

Calculul deplasării pereților etanși – DReW Seismic

2022.0.0.24 (20/05/2022) - New version 2022

Calculul secțiunilor din beton armat - RC-SEC - IT

2022.14.1.1061 (10/05/2022) - Versione 2022

Multi-Channel Analysis of Surface Waves - Easy MASW

2022.28.6.999 (06/04/2022) - Various software fixes

Structuri în subsol - Scatolari

2021.12.0.690 (31/01/2022) - 1 NEW

Încercări de penetrometrie statica -Static Probing

2021.20.2.968 (25/01/2022) - New release 2021

Simularea căderilor de roci 2D - GeoRock 2D

2021.12.1.958 (31/12/2021) - New release 2021

Răspuns seismic local - RSL III

2022.21.5.990 (11/12/2021) - Rilascio versione 2022

Risposta sismica locale 2D - RSL III 2D

2021.12.0.845 (06/12/2021) - 1

Răspuns seismic local 2D- RSL III 2D

2021.12.0.845 (06/12/2021) - Varie integrazioni
Modifica importazione accelerogrammi
Miglioramenti generali Rilascio Versione RSL III 2D

Analiza elementelor finite în geotehnică - GFAS

2021.12.0.845 (06/12/2021) - Version 2021 has been successfully released

Downhole - Metoda seismică Downhole

2021.16.3.621 (06/12/2021) - Release version 2021

Proiecții stereografice de mecanică a rocilor - GMS

2022.8.1.608 (08/10/2021) - New version released

Stabilitatea taluzurilor - Slope

2021.30.6.1469 (27/09/2021) - New release 2021

Proiectarea instalațiilor geotermice - GHP DESIGN 3D

2022.8.3.47 (29/06/2021) - ro

Formularul de Geologie și Geotehnică - Geostru Formula

2022.7.3.925 (23/04/2021) - Versiune 2018

Diguri din pământ - ESD

2022.2.1.468 (22/04/2021) - Vers. 2022

Criterii de rupere al unei mase de rocă, conform lui Hoek Brown – Rocklab

2022.8.4.435 (22/04/2021) - VERSION 2018

Fundații - Fondazioni CA

2021.16.0.1050 (14/04/2021) - New release

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2021.20.4.828 (02/04/2021) - New Release 2021

Mecanica rocilor – Rock Mechanics

2022.20.4.837 (26/03/2021) - Version 2021

Calcul structural - Edifici in CA

2024.16.0.1140 (14/03/2021) - Versione 2021

Capacitatea portantă și tasări – LoadCap

2022.30.2.1040 (16/12/2020) - Version 2022 released

Gabioane și praguri de fund - GDW

2022.21.2.935 (01/12/2020) - New version 2022 released

Încercări de penetrometrie dinamica - Dynamic Probing

2021.26.5.1051 (17/11/2020) - New release 2021.

Capacitatea portantă și tasări – LoadCap

2021.30.2.1038 (10/10/2020) - New Release 2021.

Multi-Channel Analysis of Surface Waves - Easy MASW

2021.26.5.938 (29/09/2020) - Release new version 2021

Ziduri de sprijin - MDC

2021.29.7.1024 (26/09/2020) - New release 2021

Piloți și micropiloți-MP

2021.16.2.999 (09/09/2020) - 2021

Analiza lichefierii terenului - Liquiter

2021.24.5.1022 (28/07/2020) - Seed Idriss (1982/1985), Liquefaction Resistance o Soil: Summary Report 1996 NCEER and 1998 NCEER/NSF

Răspuns seismic local - RSL III

2021.20.5.858 (21/07/2020) - Nuova versione 2021 Corretto BUG in spettro progetto SLD, SLO

Gabioane și praguri de fund - GDW

2021.21.2.735 (16/07/2020) - New release

Pereți susţinere excavaţii - SPW

2021.31.4.1000 (08/06/2020) - New release 2021

Mecanica rocilor – Rock Mechanics

2021.20.4.737 (03/06/2020) - Nuova versione 2021

Calculul secțiunilor din beton armat - RC-SEC - IT

2021.11.0.1006 (25/05/2020) - Versione 201, vari bug fox

Raport spectral vertical orizontal - Easy HVSR

2021.24.4.833 (20/05/2020) - New release

Simularea căderilor de roci 3D - GeoRock 3D

2020.16.0.650 (14/05/2020) - New Release 2020

Calcul structural - Edifici in CA

2020.16.0.1038 (11/05/2020) - Bug FIX

Fundații - Fondazioni CA

2020.16.0.1038 (11/05/2020) - New release 2020

Evaluarea riscului hidrologic - Hydrologic Risk

2021.20.1.702 (17/03/2020) - New release as been released

Piloți și micropiloți-MP

2020.16.2.996 (13/02/2020) - New release 2020

Calculul secțiunilor din beton armat - RC-SEC - IT

2020.11.0.1004 (25/01/2020) - Nuova versione 2019 correzioni bug vari.

Proiecții stereografice de mecanică a rocilor - GMS

2020.8.1.465 (02/12/2019) - Vers. 2020, compatibility win 10

Stabilitatea taluzurilor - Slope

2020.30.6.1408 (30/11/2019) - Solved compatibility with windows 10 Release 2020

Ziduri de sprijin - MDC

2020.29.7.1001 (30/11/2019) - Solved compatibility win10

Raport spectral vertical orizontal - Easy HVSR

2020.24.4.733 (29/11/2019) - Version 2020 has been released

Parametrii geotehnici caracteristici - CVSoil

2020.12.6.468 (20/11/2019) - New release 2020

Coloane stratigrafice - Stratigrapher

2020.22.1.868 (14/11/2019) - New release 2020

Încercări de penetrometrie dinamica - Dynamic Probing

2020.26.5.999 (14/11/2019) - Update de mello formula for the calculation of the shear resistance angle New version 2020

Pereți susţinere excavaţii - SPW

2020.31.4.988 (12/11/2019) - New release 2020

Downhole - Metoda seismică Downhole

2020.16.3.518 (12/11/2019) - Editing Delay Time New release 2020

Calcularea secțiunii din beton armat conform EC - RC-SEC-EN

2020.2.0.829 (29/10/2019) - A new version 2020 has been released

Analiza lichefierii terenului - Liquiter

2020.20.4.988 (01/10/2019) - New Release

Ziduri de sprijin - MDC

2020.28.7.1000 (26/09/2019) - New version 2020

Capacitatea portantă și tasări – LoadCap

2020.30.2.1002 (20/09/2019) - New Release 2020

Încercări de penetrometrie statica -Static Probing

2020.20.2.941 (09/09/2019) - New release 2010

Capacitatea portantă și tasări – LoadCap

2019.30.2.1002 (05/09/2019) - New release 2019

Mecanica rocilor – Rock Mechanics

2020.20.4.637 (19/07/2019) - Versione 2020

Mecanica rocilor – Rock Mechanics

2018.20.3.437 (18/07/2019) - Rilascio versione 2018

Simularea căderilor de roci 2D - GeoRock 2D

2020.12.1.756 (16/07/2019) - New Release 2020

Formularul de Geologie și Geotehnică - Geostru Formula

2020.7.3.525 (02/07/2019) - BUG FIX New release 2019

Multi-Channel Analysis of Surface Waves - Easy MASW

2020.26.5.932 (01/07/2019) - Bug Fix

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2020.20.4.628 (01/07/2019) - Bug fix

Răspuns seismic local - RSL III

2020.20.5.751 (30/06/2019) - Bug fix


Analiza lichefierii terenului - Liquiter

2019.20.4.988 (28/06/2019) - Important correction in the calculation of: Idriss & Seed, 1997 Robertson & Wride Idriss & Boulanger 2014 variation of coefficients in liquefaction potential

Ziduri de sprijin - MDC

2019.28.7.999 (18/06/2019) - New Release 2019

Coloane stratigrafice - Stratigrapher

2019.22.1.768 (18/06/2019) - New release 2019

Calculul secțiunilor din beton armat - RC-SEC - IT

2019.11.0.976 (13/06/2019) - Aggiornamento alle NTC 2018. La nuova versione 2018 è compatibile con: NTC 2018, EC2, EC8. In questa versione non è contemplata la NTC 2008 e Circ.
Per le NTC 2008 occorre usare la versione precedente.

Gabioane și praguri de fund - GDW

2019.21.2.635 (29/05/2019) - New Release 2019

Pereți susţinere excavaţii - SPW

2019.31.4.948 (29/05/2019) - New release 2019

Diguri din pământ - ESD

2019.0.0.348 (28/05/2019) - Bux fix

Fundații - Fondazioni CA

2019.16.0.1024 (24/05/2019) - 2019

Software topografie - TriSpace

2019.24.3.632 (23/05/2019) - VERSION 2019

• Corespondentã între sectiuni in planimetrie si sectiuni; Sectiuni echidistante; Sterge dectiune; Mai multe sectiuni în acelasi raport de listat sau DXF; Posibilitatea de a adãuga lucrãri de interventie pe sectiuni: ziduri, piloti, etc.; Exportul sectiunilor inclusiv ale lucrãrilor pentru alte programe GeoStru; Maximizare fereastrã 3D; Gestiune stratigrafie 3D; Adãugare puncte de penetrometrie; Rendering fotorealistic al sectiunilor 3D.
• Stergerea uneia sau a mai multor sectiuni în grup.
• Sectiuni echidistante cu corespondentã între sectiune în plan si sectiune.
• Import fisiere DXF în bloc si calibrare.
• Maximizare fereastrã 3D.
• Vizualizarea tuturor sectiunilor în acelasi fisier de lucru cu paginatie.
• Crearea unui fisier DXF unic cu toate sectiunile.
• Modificatã modalitatea de generare a etichetelor curbelor de nivel.

Diguri din pământ - ESD

2019.0.0.248 (22/05/2019) - New release 2019

Stabilitatea taluzurilor - Slope

2019.29.6.1399 (21/05/2019) - Bug correction in reinforced soli Update of EN regulations Change print module New release 2019

Încercări de penetrometrie statica -Static Probing

2019.20.2.841 (17/05/2019) - New release 2019

Calcul structural - Edifici in CA

2019.15.0.1004 (08/04/2019) - New release 2019: MODIFICHE EDIFICI CA
Tutte le misure in daN sono state variate in kN. Le tensioni sono espresse tutte in N/cm² (Mpa). E' possibile effettuare la verifica dei nodi travi-colonne sia secondo le NTC2018, sia secondo la Circolare2019.

Fundații - Fondazioni CA

2019.15.0.1004 (08/04/2019) - New release

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2019.20.4.518 (29/03/2019) - New Release 2019

Multi-Channel Analysis of Surface Waves - Easy MASW

2019.26.5.732 (25/03/2019) - Release new version 2019

Răspuns seismic local - RSL III

2019.20.5.651 (20/03/2019) - ICMS 2018. Integrazione elaborati con il fattore di amplificazione S

Calculul secțiunilor din beton armat - RC-SEC - IT

2018.10.0.776 (07/03/2019) - Rilascio versione 2018.

Analiza elementelor finite în geotehnică - GFAS

2019.12.0.700 (22/02/2019) - New version 2019, Free seepage, Dynamic load, Time History

Multi-Channel Analysis of Surface Waves - Easy MASW

2018.26.5.632 (12/12/2018) - Bug fix in soil category
New version 2018, general improvements to new regulations and new methods for soil classification


Capacitatea portantă și tasări – LoadCap

2018.28.2.878 (10/12/2018) - Fix error in calculation settlements Burland Burbidge
New standard design NTC 2018
Check limit load (SLU)
Subgrade reaction constant calculated according to K=E/L*(1-Poisson^2)
Major version Loadcap 2018 
• General improvements;
• Implemented analytical solutions for estimating the ultimate bearing capacity of geogrid reinforced soil foundations (RSF) for both sand and silty clay soils;
• Method Vesic 1975 Change depth and form factor;
• Opening files with drag&drop;
• Standards upgrade: NTC 2017, SR EN 1997-1/NB/2007;
• Calculating seismic parameters for areas in Central and Eastern Europe;
• Plugin management: Embankment (Embankment settlements ), Overturning (Foundation overturning Safety factor), Converting User Units;
• Update of System components.x.824: Fix Save as a function for the computation report and colour selection for the stratigraphy.


Piloți și micropiloți-MP

2018.16.2.990 (06/12/2018) - New relase 2018


Easy Refract - Interpretarea măsurătorilor seismice de refracție

2018.20.4.418 (04/12/2018) - New release 2018

Diguri din pământ - ESD

2018.0.0.238 (29/11/2018) - Release 2018 version


Interpretarea datelor încercărilor de pompare - GeoTheis

2018.10.0.362 (26/11/2018) - New release 2018

Răspuns seismic local - RSL III

2018.19.5.441 (23/11/2018) - 2018

Proiecții stereografice de mecanică a rocilor - GMS

2018.8.1.365 (22/11/2018) - Bux fix in triangulations


Ziduri de sprijin - MDC

2018.25.7.990 (12/11/2018) - New version 2018


Prelucrări hidrologice - Runoff Lab

2018.0.14.259 (06/11/2018) - 2016

Analiza lichefierii terenului - Liquiter

2018.18.4.448 (02/11/2018) - New version 2018, bug fix in Tokimatsu_Yoshimi


Pereți susţinere excavaţii - SPW

2018.31.4.928 (27/10/2018) - Optimizations flow net.

Simularea căderilor de roci 3D - GeoRock 3D

2018.16.0.550 (19/10/2018) - New release 2018, extension to 400.000 point

Stabilitatea și consolidarea blocurilor de rocă - RockPlane

2018.9.2.371 (15/10/2018) - Version 2017

Calcularea secțiunii din beton armat conform EC - RC-SEC-EN

2018.2.0.629 (12/10/2018) - Release version 2018

Analiza elementelor finite în geotehnică - GFAS

2018.11.0.604 (01/10/2018) - New Release 2018

Parametrii geotehnici caracteristici - CVSoil

2018.12.5.368 (01/10/2018) - New Release 2018

Raport spectral vertical orizontal - Easy HVSR

2018.24.4.633 (30/09/2018) - General bug fix

Criterii de rupere al unei mase de rocă, conform lui Hoek Brown – Rocklab

2018.8.4.232 (29/09/2018) - New VERSION 2021

Proiecții stereografice de mecanică a rocilor - GMS

2018.7.1.265 (28/09/2018) - The release 2018 version started


Coloane stratigrafice - Stratigrapher

2018.22.1.568 (26/09/2018) - New version 2018, bim compatible.

Software topografie - TriSpace

2018.24.3.632 (26/09/2018) - Export hydrographic basin for Hydrologic Risk New version 2018, general improvement and general bug fix, compatibility with win 10, upgrade manual and documentation

Evaluarea riscului hidrologic - Hydrologic Risk

2018.20.1.602 (25/09/2018) - New release 2018

Gabioane și praguri de fund - GDW

2018.21.2.435 (24/09/2018) - New release

Stabilitatea taluzurilor - Slope

2018.29.6.1369 (18/09/2018) - New Version 2018, general improvements
New user interface; Janbu method integration; Removing the number of Slices limits; Diagram: Shear strength and numerical export value; Combination of actions: A1 + M1 + R1, A2 + M2 + R1, A2 + M2 + R2; Reinforced elements, new archives; New European regulations have been added.

Pereți susţinere excavaţii - SPW

2018.31.3.924 (18/09/2018) - New version 2018


Încercări de penetrometrie dinamica - Dynamic Probing

2018.25.5.954 (04/09/2018) - Release 2018, upgrade soils category and add new correlations
Import and export of ags 4. The Association of Geotechnical and Geoenvironmental Specialists (AGS)


Raport spectral vertical orizontal - Easy HVSR

2018.23.4.533 (07/07/2018) - Export confidencial curve H/V
New release 2018. Calculate vs,eq.

Formularul de Geologie și Geotehnică - Geostru Formula

2018.7.3.425 (06/07/2018) - New release 2019

Încercări de penetrometrie statica -Static Probing

2018.20.2.741 (09/06/2018) - Release new version 2018

Downhole - Metoda seismică Downhole

2018.16.3.509 (06/06/2018) - Modification calculation VS30 in interval method rules upgrade

Fundații - Fondazioni CA

2018.15.0.958 (02/06/2018) - 2018

Calcul structural - Edifici in CA

2018.15.0.958 (01/06/2018) - Nuova versione 2018 aggiornata secondo le NTC 2018. Nota: questa versione è unicamente compatibile con le NTC 2018, pertanto occorre utilizzare la versione precedente di Edifici CA per calcoli svolti con precedenti normative. Si consiglia di visionare il manuale d'uso


GEOSTRU 365

2018 (27/04/2018) - geostru 365

Structuri în subsol - Scatolari

2018.12.0.490 (13/04/2018) - SCATOLARI 2018 AGGIORNATO ALLE NTC18

Simularea căderilor de roci 2D - GeoRock 2D

2018.12.1.456 (09/02/2018) - new release 2018

Pachet de software utilitare - Geoutility

2018.12.0.732 (05/12/2017) - Version 2017

Gabioane și praguri de fund - GDW

2018.21.1.335 (01/11/2017) - New version 2018


Stabilitatea taluzurilor - Slope

2017.25.6.1275 (16/10/2017) - Automatic combinations
The inertial and cinematic effect;
Fixed errors in the reinforcing elements;
VERSION 2017 RELEASE
General improvements;
Adding anisotropic analysis;
Adding plugin management;
Bug fix.

Piloți și micropiloți-MP

2017.16.2.704 (11/10/2017) - VERSION 2017

• Upgrade standards SR-EN 1997-1
• Computation of Screw-piles

Încercări de penetrometrie dinamica - Dynamic Probing

2017.25.5.734 (15/09/2017) - New Correlation for Weight Unit
Modulus oedometric stress-dependent in according: EC7, DIN 4094-3
Fixed display problem in legend permissible pressures MAJOR UPGRADE Dynamic Probing:

• General improvements
• New correlations for: Unit weight & Saturated unit weight
• New reference procedures: ISSMFE Technical Committee on Penetration Testing (1988) Dynamic Probing (DP) International Reference Test Procedure
• Rules: Annex D.1. Standard Penetration Test (SPT) | Eurocode 7 part 3
• Computation of CN (Liao & Withman), N60, N1,60
• New correlations for the computation of the unit weight
• New correlations Angle of shearing resistance Kulhawy & Mayne (1990), Hutanaka & Uchida (1996), Wolff (1989), Mayne et al. (2001), JRA (1996), Brown & Hettirachchi (2008)
• Comparison between graphics
• Improvement of the algorithm for the computation of Vs,30

Raport spectral vertical orizontal - Easy HVSR

2017.23.4.333 (14/09/2017) - Major release of HVSR 2017

Încercări de penetrometrie statica -Static Probing

2017.18.2.541 (13/09/2017) - FIX: general data
FIX: in assigned manual lithology
Fix: interpretation Robertos e Wride
Updated: algorithm from import files ascii
Adjustment in import data from files
Category Soil extension at 30 mt
Upgrade Version 2017.

Ziduri de sprijin - MDC

2017.25.7.948 (04/09/2017) - Bug Fix in: Seismic capacity
News version 2017, compatible with win 10, general improvements, added New standards and bug fix

Analiza elementelor finite în geotehnică - GFAS

2017.11.0.404 (04/09/2017) - New version 2017: General improvements, bug fix in stage construction analysis

Multi-Channel Analysis of Surface Waves - Easy MASW

2017.26.5.228 (09/08/2017) - Migrate location services from SOAP to REST
New version 2017. General improvements and bug fixes

Parametrii geotehnici caracteristici - CVSoil

2017.12.5.268 (07/08/2017) - New version 2017

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2017.20.4.308 (07/08/2017) - Release 2017, general upddate and bug fix

Analiza lichefierii terenului - Liquiter

2017.18.4.448 (04/07/2017) - Liquiter major version 2017 in this version:

• General improvements
• New correlation between CPT (mechanical) and CPTE (electrical)
• New method: C. Hsein Juang 2006

Diguri din pământ - ESD

2017.0.0.124 (08/06/2017) - 15.06.2017 Release final version
Release beta version of ESD 2017: Earth Small Dams

Coloane stratigrafice - Stratigrapher

2017.21.0.268 (30/05/2017) - Version 2017, general improvements

Evaluarea riscului hidrologic - Hydrologic Risk

2017.20.1.508 (29/05/2017) - New version 2017, general improvement and general bug fix, compatibility with win 10, upgrade manual and documentation

Pereți susţinere excavaţii - SPW

2017.31.3.724 (12/04/2017) - News version 2017, compatible with win 10, general improvements, added New standards and bug fix

Pachet de software utilitare - Geoutility

2017.12.0.629 (17/03/2017) - Version 2016

Simularea căderilor de roci 3D - GeoRock 3D

2017.16.0.400 (09/03/2017) - Version 2017: General improvement, compatibility with win 10, bug fix

Stabilitatea și consolidarea blocurilor de rocă - RockPlane

2017.9.2.349 (09/03/2017) - Version 2017: General improvement, bug fix, win 10 compatibilities, update help

Mecanica rocilor – Rock Mechanics

2017.20.3.338 (25/02/2017) - change log

Simularea căderilor de roci 2D - GeoRock 2D

2017.12.1.400 (08/02/2017) - General improvements and bug fixes

Downhole - Metoda seismică Downhole

2017.15.3.399 (12/12/2016) - Overall update

Multi-Channel Analysis of Surface Waves - Easy MASW

2016.26.5.120 (31/10/2016) -

• Improvements regarding the assignation of custom graphic properties. 
• Implemented Bing Maps for locations. 
• Improvements regarding the management of colour options are now kept for all projects. 
• Implemented the possibility of reversing the polarity of single traces. 
• Improved customization of colour set for the spectra by saving the settings in the file. 
• Implemented the opportunity to estimate the layer density from the value of Vp. 
• Implemented the automatic sending of errors to GeoStru. 
• Implemented the possibility of importing drm files. 
• Implemented the option to select the valuable part of the traces inscribing them in a polyline. 
• Saving the path of the last used texture. 
• Improvement in managing general data. 
• Export of the seismic stratigraphy in .edp file. 
• Implemented the possibility of contacting the GeoStru staff directly from the software. 
• Implemented the import of SEG2 files that use 20bit numerical format. 
• The distribution issue was solved. 
• Viewing and printing of the stratigraphy. 
• Introduction of the LITE version with the following limitations: - Maximum number of modes that can be used for processing: 1; - Synthetic Model: Disabled; - Print reports: Limited. 
• Software available in Spanish. 
• Available in the English version. 
• New functions for the report editor. 

Încercări de penetrometrie dinamica - Dynamic Probing

2016.25.5.626 (21/09/2016) -

• Export of graphics in Excel for allowable pressure and reduced allowable pressure 
• Method Terzaghi-Peck (1948), computation of Cu: min and max values in computation report. 
• Introduced a new column in the data input table for the importance of NSPT on the equipment step. 
• Given the option to alter the characters' size for the number of blows: Graphic report options -> Text management. 
• Introduction of drilling system efficiency. 
• Correlation coefficient variable with the depth. 
• Computation of CN. 
• Computation of N160. 
• Verification of the correlations Nspt N160. 
• Review of the Spanish version of the program. 
• General data window, the introduction of order code, number of certificates to attach, zone, latitude and longitude. 
• Adaptation according to Circolare 08 September 2010, n. 7619/STC. Italian Ministry of the infrastructures and transportations. Criteria for releasing the authorization to the Laboratories for the execution and certification of geognostic inquiries, sampling and tests on site of which art. 59 of the DPR n. 380/2001. 
• Determination of the zone in Google Maps. The image can be saved and used like a background "raster image" to determine the tests. 
• Current test window, added certification data: certificate number, acceptance report, order number and related data. The same data was added to the graphic model and print report. 
• Graphical options window added: ministerial authorization, signatures. The same data was added to the visual model and print report. 
• Attention in Graphic options window > View panel, we added a selection command that allows you to colour the diagrams transparently and uniformly. 
• Graphic objects: New graphic objects and colours. 
• Tables in the print report - added in the initial header the terms expected for law and planimetry with the indication of the location of the tests, index and summary. 
• In the elaboration phase and the report, some commands were created to improve the navigation inside of the documents. 
• Improved management of 3D stratigraphy. We remember that the automatic reconstruction of 3D stratigraphy takes place on the base of the names assigned to the layers. For example, test 1 is composed of three layers named: A, B, C; test 2 must have the same number of layers with the same names: A, B, C. The same reasoning must be followed for successive tests. For an optimal view of the 3D it is advised to assign the same colours or textures to the layers of various tests but with the same name. 
• Borehole tests, cohesive-cohesionless soils processing. 
• Soil category: computation of Vs, correlation of Otha and Goto from 78 for the differentiation of the deposit's age. 
• Soil category: type s2 for soils susceptible to liquefaction. 
• Soil category: theoretical notes included in the print report. 
• Computation of sub-foundation coefficient in shallow foundation module. 
• Modified layer generation in data input. 
• New options in graphic preferences. Water table view even in the absence of stratigraphy. 
• Printing more copies when using Windows 7. 

Stabilitatea taluzurilor - Slope

2016.25.6.1258 (20/09/2016) -

• Algorithm optimization for the computation of the plastic moment of reinforced concrete sections
• Computation of horizontal bearing capacity according to Broms in the presence of water table
• Drag-and-drop function for file opening
• New reinforcing element: Wire Mesh
• Fix input stratigraphy
• Optimization for automatic generation of block walls in mechanically stabilized earth module. Implemented the possibility to alter texts in mechanically stabilized earth modules.
• Implemented the automatic computation of seismic coefficients for the most used standards, Automatic computation of neutral presion increment in a dynamic field and automatic solution for the integration of Arias intensity accelerogram and Trifunac accelerogram.
• Implementation of the DEM method for non-linear computation. It is possible to make a non-linear analysis assigning the constitutive features of the material. The Newton-Raphson method of tangents performs the plastic strain distribution procedure.
• New, reviewed version.
• Optimization for computation models Morgenstern&Price and Spencer.
• Fixed problem regarding the print of neutral pressures for Morgenstern & Price and Spencer methods.
• Implemented the possibility to include/exclude theoretical notes in the computation report. Details of the works of intervention in the report. Optimizations for the 3D import and DXF import. DEM algorithm integration. Integrations to the computation report of mechanically stabilized earthworks.
• Fixed printing of pore pressures by the Sarma method.
• Changes to the print report: optimizing the style of text and tables and printing the two values of the soil stiffness (DEM Method).
• A new work intervention, "Reinforcement element ", offers greater sliding resistance along a probable failure surface. MRE module was completely revised, introducing a function for the automatic generation of the slope profile, the possibility to choose from: a terraced profile and a constant slope profile. Profile with conventional blocks and reinforced blocks are also available.
• The new method of calculation is Zeng Liang. Among the best methods in recent years. Excellent results for the consolidation with Piles.
• Method DEM (Discrete Element Method): Implemented new methods for non-linear analysis with new options for analysis, adding the variability of geotechnical parameters according to the displacements and extrapolation of all calculation results. Importing sections, including support works Piles and Reinforced Earth fromTrispace.
• Added reference axes "Click on the ruler to add the axes of reference."
• Added shortcuts: click on the drawing and type: A for archives, G for geotechnical, Z to zoom, P to move, D for distance measurement.
• Generation of artificial non-stationary seisms, precision: Sabetta F., Pugliese A.: Estimation of Response Spectra and Simulation of Nonstationary Earthquake Ground Motions, Bulletin of the Seismological Society of America, Vol. 86, No. 2, pp. 337-352, April 1996

Easy Refract - Interpretarea măsurătorilor seismice de refracție

2016.20.4.204 (14/09/2016) -

• Added the possibility to reverse the order of traces for every single project shot. 
• Added the ability to truncate the acquisition of the paths during the import phase. This option is convenient for long investments that otherwise would make the management of the shots costly from the point of view of the memory used. 
• Graphic improvements for tests with one or two images. 
• Implemented Bing Maps for locations. 
• Implement the reading of BISON-2 files with .dat extension. 
• Implemented the possibility of reordering traces after they have been imported into the software. N.B. Before using the reorder tool, you must import all the shots. 
• Customization of the colour that highlights the semi-wave of the traces. 
• Polarity inversion for more trials at the same time. 
• Improvement of the graphic area of travel time curves definition. 
• Implemented the possibility of reversing the polarity of single waves. 
• Graphical improvements. 
• Improved the print preview of graphics. 
• Implementation of the Critical Distance computation technique. 
• Performance of Undo/Redo functions. 
• Advances in the import of SEG2. 
• Implement the export in *.csv and *.asc formats. 
• Improvement regarding the search management of the work area. 
• Added the ability to perform elaborations for Vs waves. The seismogram allows the import of the two shots (S1 and S2) to identify the S-wave arrival correctly. 

Ziduri de sprijin - MDC

2016.25.7.914 (11/09/2016) -

• Changes in Hansen algorithm Export file for GFAS 
• Improved calculation structural algorithm 
• Optimization of calculation algorithm of the reinforcement for walls with stepped sections. For walls founded on piles, introduced a symbol for the check condition to limit vertical load. 
• Integrations on forces diagrams. 
• Modified the pressure diagrams. Integration on bearing capacity. Integration on computation report. Integration on global stability module's statement. 
• Implemented Hansen's method for the computation of bearing resistance. 
• Executed a new command for the advanced management of the vertices' coordinates of the wall section. Using this command will be possible to model many other types of walls. From the new command "Forces" can be seen the overturning and stabilizing actions on the border. 
• Revision of the diagrams of the increase in thrust due to the earthquake. 
• Wall section that protrudes from the ground, as for the fences. Enter the negative height for the barrier. 
• Application of loads at different sizes from the ground level. 
• Importing files from static and dynamic penetration tests. The files can be imported with direct commands or simple drag-and-drop operations on the workspace. 
• The files generated by our programs are open to editing with a text editor. 
• The import of penetration tests is a handy tool because dozens of geotechnical parameters are automatically converted regarding units of measurement. 
• By assigning a negative height to the dam is possible to lower the ground surface level behind the wall. 
• Complete review of the software in national and international versions. 
• Improvements in materials printing. 
• A new version is available. 
• Computation report integrated. 
• Progress on the editor of the computation report. 

Analiza lichefierii terenului - Liquiter

2016.18.4.440 (28/08/2016) - A method based on the results of SPT tests (Boulanger & Idriss, 2014) A method based on the results of CPTe/CPTu tests Boulanger & Idriss, 2014) A method based on the velocity profile of shear waves Vs (Andrus & Stokoe, 2000) FIX SAVE DATA

• Implemented the method of Sonmez (2003) for the computation of the Liquefaction Potential Index.

Prelucrări hidrologice - Runoff Lab

2016.0.13.159 (24/08/2016) - Runoff Lab

Evaluarea riscului hidrologic - Hydrologic Risk

2016.20.1.402 (25/07/2016) - Minor upgrade 398

Parametrii geotehnici caracteristici - CVSoil

2016.12.5.68 (22/07/2016) - Adding correlation between surveys
VERSION 2016

• Implemented Bing Maps for locations.
• Introduced improvements in the report management and the rtf / doc / docx format saving.
• Opportunity to enter a summary investigation containing the elaborations of the parameters present in more investigations of the same area.
• Implementation of an automatic control system and downloads of updates.
• Improvement in the management of the graphs.
• Added the possibility of removing layers from investigated verticals.
• Reduced export of the results.

Analiza elementelor finite în geotehnică - GFAS

2016.11.0.300 (30/06/2016) - Import file from MDC and general improvements
VERSION 2016

• New graphic input for the design of the Mesh
• Modal dynamic analysis, with response spectrum. All modal forms are animated.
• Nonlinear analysis using Newton-Raphson method.

Coloane stratigrafice - Stratigrapher

2016.21.0.260 (29/06/2016) - VERSION 2016

Proiecții stereografice de mecanică a rocilor - GMS

2016.7.1.165 (22/06/2016) - VERSION 2016

• Optimization of calculation algorithm of the reinforcement for walls with stepped sections. For walls founded on piles, introduced a symbol for the check condition to limit vertical load.

Downhole - Metoda seismică Downhole

2016.15.3.335 (10/06/2016) -

• Added the possibility to shift the traces by decoupling the P waves, the S1 waves and the S2 waves. 
• Implemented the computation of mean parameters using the interval method when the software does not automatically determine the soil unit weight. 
• Import of *.seg2 files generated following the standard of numerical data on16 bits. 
• Implemented the possibility of copying the seismic stratigraphy defined with the Direct Method into the Interval Method. 
• Import of *.drm files. 
• Implemented the graphic of the velocity profile for P and S waves in the "direct" and "interval" methods regarding the imposed seismic stratigraphy. 
• Introduced the possibility of eliminating the offset from the seismic traces (continuous component). 
• Improved handling of graphics with the ability to intervene on the height of the texts for the title of illustrations, numerical values ?? and descriptions of the axes. 
• Improved management of the grid for graphics. 
• Introduced the ability to display the picking values processed on the seismograms. 
• Added the ability to process only the S waves. 
• Implemented the ability to analyze files from acquisitions with a double geophone. 
• Added the ability to normalize the traces in the analysis phase. 
• Added the ability to filter the tracks. 
• A modification has been performed on the calculation of Vs30. If the test does not reach 30 meters, the last layer is extended to 30 meters. 
• Complete review of the software in national and international versions. 
• Import traces are generated using the Ambrogeo tools (*. dta files). 
• Released English and Spanish versions. 
• Edit extraction and design of the tracks from SEG2 files. 

Calcul structural - Edifici in CA

2016.15.0.756 (09/06/2016) - RILASCIO VERSIONE 2016

• I files allegati modificano la verifica apertura fessure per piastre.
• Rilasciata nuova versione di Edifici in CA. Riscrittura dell'interfaccia grafica e degli elaborati DXF. Migliorate funzioni di importazione file DXF.
• Correzione modulo calcolo solai.
• Nuova versione completamente riscritta nella gestione della grafica 2D, 3D. In questa nuova versione è possibile gestire tutti gli elaborati grafici in piena compatibilità con ambienti grafici quali Autocad ecc. Inoltre tutti glie elaborati grafici possono essere stampati in modo diretto con stampanti o plotter. Per l’installazione della nuova versione 2011.7.0.x è necessario rimuovere completamente la versione precedente.
• Correzione stampa pressioni terreno per nodi platea nelle combinazioni sismiche.
• Correzione file grafico *.dxf relativo alle pressioni sul terreno.
• Correzione stampe degli sforzi nei pilastri.
• Aggiunte nella stampa delle verifiche dei pilastri (stampa di bj ex (7.4.29) NTC).
• Staffe nodali in zona 4.
• Correzione problema semiprogetto staffe sezione media pilastri.
• La correzione riguarda la generazione dei conci rigidi delle travi di fondazione che collegano plinti a bicchiere con nodi in cui non sono presenti plinti.
• Correzioni nei moduli solai e scale.
• Aggiunto comando per la gestione separata delle armature per le travate in fondazione ed elevazione.
• Calcolo automatico di solai e scale.

Fundații - Fondazioni CA

2016.15.0.756 (09/06/2016) - 2018

Pereți susţinere excavaţii - SPW

2016.31.3.620 (08/06/2016) -

• Modified computation algorithm for continuous beam. 
• Implemented the possibility of managing diagrams texts. 
• FEM method - anchors arranged on multiple rows: improved the drawing function of anchors structural carpentry. 
• Improvements in user interface and computation report. 
• Import of topographic section from DXF files, TriSpace files and text files. 
• Vertical limit load as a function of a correlation factor for the investigated verticals. 
• Vertical limit load for rectangular sections. 
• Dynamic information for the bulkhead. You have to move with the mouse on the head of the bulkhead to get information about geometry, section composition and type. 
• Improvement connection beam module. 
• A new way to draw the connection beam. 

Simularea căderilor de roci 3D - GeoRock 3D

2016.16.0.300 (08/06/2016) -

• Added the possibility to identify the correspondence between the graphics of trajectory, energy and height of the boulder. 
• Implemented the option to insert 2D and 3D markers on a contour plan. This feature helps represent the fiducial points at known coordinates. 
• Optimized *.asc file import. The user can select a limited number of points to perform the triangulation. 

Calculul secțiunilor din beton armat - RC-SEC - IT

2016.10.0.510 (03/05/2016) - VERSIONE 2016 Eliminazione semiprogetto automatico per sezioni prive di armatura a taglio non verificate

Gabioane și praguri de fund - GDW

2016.21.1.335 (27/04/2016) - VERSION 2016

Analiza stabilității globale - GSA

2016.25.6.1239 (20/04/2016) -

eGeoCompass - Android geological compass

10 (12/04/2016) - RO

Stabilitatea și consolidarea blocurilor de rocă - RockPlane

2016.9.2.249 (11/04/2016) - VERSION 2016

Interpretarea datelor încercărilor de pompare - GeoTheis

2016.10.0.302 (11/04/2016) - Copy-paste and automatically recalculate
General improvements


Calcularea secțiunii din beton armat conform EC - RC-SEC-EN

2016.2.0.553 (11/04/2016) - Correzione aliquota minima dell'armatura tesa per sezioni di travi in zona sismica Version 2016

• Implemented National Annex of Bulgaria and Italy
• Corrected ratio Es/Em in eq. (7.9) EC2 from 15 to the actual value

Piloți și micropiloți-MP

2016.16.2.531 (09/04/2016) -

• Implemented the computation of the safety factor for horizontal actions. Improved the save option for load combinations. 
• Representation in tabular form of the output values ?? of the shear stress and everyday stress, of the coefficient of lateral thrust, friction along the shaft and the adhesion factor. 
• An improved computational model of the modulus of subgrade reaction Ks (Chiarurgi - Maia). 
• Import from Static Probing. 

Simularea căderilor de roci 2D - GeoRock 2D

2016.12.1.400 (09/04/2016) -

• Improvements for the management of launches > 1000. 
• Implemented graphics with a print preview function, the command to display all trajectories and the knowledge to delete the elements of the materials database. Created new options: velocity graphic for each revolution, rotation and envelope. Activated Undo and Redo commands on multiple levels. 
• Import from Excel file modified. 
• Various corrections. 

Încercări de penetrometrie statica -Static Probing

2016.18.2.522 (09/04/2016) -

• New command to assign the geotechnical behaviour to layers' group. It is available by the mouse's right button in the Geotechnic Cal. of the Data Entry window. 
• Maintenance for the international version. 
• Correction for the formatting of the shear wave velocity. 
• In the Graphic options window, the View panel has added a new tool for graphics' uniform and transparent drawing. 
• New graphical objects and colours. 
• The tabular reports have added information regarding the location of the tests, index and summary. 
• New commands for navigating inside the files in the processing and report phase. 
• Seismic piezocone (SCPTU). 

Software topografie - TriSpace

2016.24.3.330 (09/04/2016) - fix bug in import txt file "format srtm" VERSION 2016

• Added a command to scale the label's font (contour lines).
• Advanced Management DXF file import.

Pachet de software utilitare - Geoutility

2016.12.0.527 (09/04/2016) - VERSION 2016

Mecanica rocilor – Rock Mechanics

2016.20.3.237 (20/01/2016) - change log

Capacitatea portantă și tasări – LoadCap

2016.25.2.812 (04/01/2016) - -Calculate post-seismic settlements with Idriss and Boulanger, Pradel, Yasuhara and Andersen

Raport spectral vertical orizontal - Easy HVSR

2016.23.4.163 (15/12/2015) -

• Optimization search algorithm resonance frequency 
• Implemented Bing Maps for locations. 
• Added support to make the application independent from the international options and language defined within the Control Panel of Windows. The software will use the point as a decimal point and a comma for digit grouping. 
• Improvement of drawings export in the final report. 
• Introduced an improvement in smoothing calculation with Triangular constant, Triangular proportional and Moving average techniques. 
• Improved the processing with customed duration windows. 
• Implemented the import of drm format files. 
• Implemented the export of the stratigraphy in .edp files. 
• Implemented the possibility of contacting GeoStru Staff directly from the software. 
• Implemented the export of the H/V spectrum in csv format to be used for comparisons with various acquisitions. 
• Improvement in managing the graphics of the H/V spectra. 
• Progress in the direction of the inversion models. 
• Improvement in the export of H/V pictures for the print reports. 
• Improved the import of SEG2 files. 
• Implementation of an autonomous system of notification and download of upgrades. 
• Added new functions for editing the computation report. 
• Ability to change the display scale for the graphics of given traces. 
• Optimization of SEG2 file import. 
• Optimization of trace import from saf files. 
• Display the coordinates of the H/Vspectral ratio points in the corresponding graphic. 

Formularul de Geologie și Geotehnică - Geostru Formula

2016.7.3.28 (15/09/2015) - New release 2015
Bug fix in share soils database
New Correlation Vs with Unit Weight and saturated, Cohesion, Angle of Shearing News: English and Spanish versions

Interpretarea datelor încercărilor de pompare - GeoTheis

1 (19/08/2015) - 2015

Evaluarea riscului hidrologic - Hydrologic Risk

2016.20.1.392 (30/07/2015) -

• Introduced two new features in the calculation: Order sections and Recalculate sections elevations. By convention, the river sections had to be assigned opposite to the current direction; the option introduced Order sections" allows to order the areas even though they were assigned from upstream to downstream. Every time that river elevations change it must be used the command "Recalculate sections elevations" the program will update the elevations to the new changes. 
Section Direction individuation. The direction must always be the same to draw the flooding map correctly. 
• New command to modify sections: allows plan section displacements. Direction can be changed by right-clicking the section. Attention: the sections must always have the same direction. 
• Riverbed sections from DXF. 
• New command in View menu – ONLY hydrologic network. 

SPW Extension

2016.31.3.615 (16/07/2015) - Version 2016

LoadCap Extension

2016.24.2.784 (15/07/2015) - RO